727a Deere
New member
- Joined
- Aug 30, 2023
- Messages
- 1
- Tractor
- 727a John Deere zero turn mower
Stalling when gets hot and engaging blades
Mowing Stalling when hot and engaging blades
- Thread starter 727a Deere
- Start date
- Views: 638
Roadworthy
Elite Member
If the mower has a two cylinder engine make sure both cylinders are running. If you have one dead cylinder the mower will still run but power will be greatly diminished.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,601
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
727a Deere
Welcome to TBN
Roadworthy likely correct, and the Kawasaki is only firing on one cylinder.
To check that, start it and then pull one plug wire off. If the engine dies, the other cylinder is not firing. If the engine continues to sound the same, then replace that plug wire and pull of the other one.
Please let us know what you find out.
Welcome to TBN
Roadworthy likely correct, and the Kawasaki is only firing on one cylinder.
To check that, start it and then pull one plug wire off. If the engine dies, the other cylinder is not firing. If the engine continues to sound the same, then replace that plug wire and pull of the other one.
Please let us know what you find out.