Spec

[Jtullis13]

I am jumping in late on this thread, but I believe I am following everything correctly and believe CoyPatton is on the right track here. You would have 2 way hydraulics if you used an external control valve, but would only be used for an implement not associated with your 3ph pump, it would have to be ran off your engines hydraulic pump.

Any luck on a loader?

 

[normde2001]

Uh, y'all do know this is a 7 year-old thread, right?:confused3:

 

[Jtullis13]

Uh, y'all do know this is a 7 year-old thread, right?:confused3:

HAHA I noticed but didn't really think much of it I guess :confused2:

 

[PROFarms]

I am jumping in late on this thread, but I believe I am following everything correctly and believe CoyPatton is on the right track here. You would have 2 way hydraulics if you used an external control valve, but would only be used for an implement not associated with your 3ph pump, it would have to be ran off your engines hydraulic pump.

Any luck on a loader?

No, spent quite a few months looking for one and found nothing, ended up buying a bigger tractor that had loader on it but have since found a place a couple hours from us that sells them that would fit this tractor

 

[Jtullis13]

Well I guess if you end up with another yanmar you know where to go. What tractor did you end up with? Hopefully it is filling your needs

 

[PROFarms]

Still got the Yanmar but got a Massey 135 with loader and in process of buying a skid steer

 

[Jtullis13]

Glad to hear you kept the Yanmar! And does your Massey 135 have the 35hp Perkins diesel? That tractor is much bigger than your YM169.