Tractor News Solution for Bobcat, and Kioti filter removals.
- Thread starter Nlight
- Start date
- Views: 4556
sengli
Silver Member
Mine popped right off. Had no issue replacing the engine oil and hydraulic filters at all.
powerscol
Veteran Member
I had to use a big old pipe wrench on my oil filter. Strap wrench failed, neighbors chain wrench just deformed the can, so dug out my huge 12 inch jaw pipe wrench, and carefully applied the needed pull. It gave in just as the can started to crush - what a relief :shocked::thumbsup:
k0ua
Epic Contributor
I had to use a big old pipe wrench on my oil filter. Strap wrench failed, neighbors chain wrench just deformed the can, so dug out my huge 12 inch jaw pipe wrench, and carefully applied the needed pull. It gave in just as the can started to crush - what a relief :shocked::thumbsup:
I am guessing this was your first filter change out of the factory filter.. It is pretty easy to get off when you were the one that put the last filter on.. NO problem at all on the second filter change:thumbsup:
