soft cab pictures

[hagman]

This for Joel 4330 and anyone else that has made a soft cab out of a golf cart cover. Could you post or send me photos of it? It would be greatly appreciated.

Hagman

 

[NY_Yankees_Fan]

http://www.tractorbynet.com/forums/kubota-owning-operating/19837-bx-2200-cheap-cab.html?highlight=cheap

Happy reading

 

[rbargeron]

Here's an $85 eBay 4-sided golf cart cover on my L5450

cover lays on 3/8" plywood under the canopy

This year I put on some snaps and edge trim - almost looks like it belongs there

 

[SCDolphin]

Is that a golf cart top or a regular tractor top??
Pretty slick!!

 

[Nickahawk]

Well Done! That is exactially what I want to do. I just put on a canopy and have been trying to come up with a soft cab enclosure "idea". Your solution is perfect. Thanks for posting the pictures.

 

[techman]

Here is my solution for my BX. Cost me $100 at Sears and fit with virtually mo mods. Only had to drill 4 holes in the 'bota.

paul

 

[Bill Barrett]

Here is my solution for my BX. Cost me $100 at Sears and fit with virtually mo mods. Only had to drill 4 holes in the 'bota.

paul

DRILL HOLES IN THE BOTA!
LOL

 

[Bill Barrett]

I like the cabs guys, I may have to do that.

 

[techman]

DRILL HOLES IN THE BOTA!
LOL

It's okay, only 1/4" and I used anesthesia before the procedure.

Actually it was only two holes on each side of the floor pan skirt.

paul

 

[hagman]

Thanks to all that replied. There are some great ides I got from the replies. Looks like I need to pick up a Sun Shade before fall so I can have the soft cab ready then. I'm working with a friend of mine that is ingenious when it comes to projects like this. When I do my cab I'll be sure to take plenty of photos and post them as we progress. Again, I can't thank everyone in the TBN community enough for all the help you gave this "newbie" You all have no idea how much your help has been appreciated.

Hagman

 

[rbargeron]

Is that a golf cart top or a regular tractor top??
Pretty slick!!

I had the canopy for a few years before the cart enclosure was added - it is a regular Teltrax Sun Shade - its about 50 x 66 inches fiberglass with a steel frame to bolt to the rops. I found that there was not a "local" dealer for my area so they said I could buy it direct from them - they had some seconds (small blemish in the finish) that were very resonable. If I remember right, the cost was under $400 including truck freight to MA from TN - great people too. For summer I just roll up the plastic sides - ties and snaps are included on the cover. On ebay right now the cover most like this one is This green one - for $80

 

[149owner]

Has anyone installed one of these on a BX2200 with the Kubota canopy? I'd like to know if these fit over the factory canopy. Thanks