Snow blower for CK2610
- Thread starter zpilot
- Start date
- Views: 2928
Robin Veerman
Veteran Member
It depends how deep the snow and the speed of backing up. Run the engine to achieve 540 pto rpm and creep if the snow is heavy or deep. My CK30HST runs a 72” easily…
RjCorazza
Elite Member
I ran a 6' blower with 27hp at the pto and it was fine (4.5hp per foot). 64" and 21.5hp pto = 4hp per foot.
After the first cut you can always take smaller bites, and with an hst the speed can generally be controlled better (slower). As already mentioned, snow type plays a significant role in snowblowing capacity.
I personally would try to stick with the width of your tractor, or slightly wider.
After the first cut you can always take smaller bites, and with an hst the speed can generally be controlled better (slower). As already mentioned, snow type plays a significant role in snowblowing capacity.
I personally would try to stick with the width of your tractor, or slightly wider.
bbstacker1
New member
I have a CK2610hst with that very blower, it runs it just fine. As others stated, you have to vary the speed by the type and depth of snow.
