Backhoe sloppy backhoe lever

[trouble11]

I have a B9200hst with a 4530L backhoe (same as a woods 750-2). The lever for the backhoe curl Twists when You are using it. I replaced the swivel joints but it still twists. This creates a problem because with it twisting You don,t get the action You were hopeing for with the bucket. Thank You all so much.
Jeff

 

[repete]

On mine I occasionally have to tighten the bolts that connect the arm to the control valve. When they get too loose they allow it to swivel around. I also did not care for how the rain would get into my controls so I cut our some heavy rubber and placed it over the control levers an against the cover to seal the opening. I do not recall the model of my backhoe but it is the under mount frame on my l2550.

On a side note, have you ever found yourself pulling harder on the lever when the digging is tough? I think somehow it allows more hydraulic pressure to pass through when it opened hard against the stop.

 

[trouble11]

repete, thank you, I will check it out in the morning.