ebeacham
Silver Member
Who makes and sells a slip clutch for a KK 6' brush hog?
What is a fair price for one?
What is a fair price for one?
slip clutch for brush hog
- Thread starter ebeacham
- Start date
- Views: 2320
JimMc
Platinum Member
Are you looking for a slip clutch PTO to replace your current PTO or the add on clutch which uses your existing PTO (you may have to shorten your existing PTO to add on a clutch) Many tractor dealers carry the addon clutches, and I believe TSC and other "box stores" do as well.
HayDR
Veteran Member, Approved Advertiser
If you have a standard round bore shear 1/2" bolt grade 2, you will need to ask for a Round bore to Round bore 1 3/8" shaft 2 plate clutch but you will need to use grade 8 bolts or you will still have a sear bolt system.
DK35vince
Super Member
Tractor Supply Co. has them for around $95.
Like the others mentioned the PTO shaft will probably need to be shortened once installed.
Like the others mentioned the PTO shaft will probably need to be shortened once installed.
lblair
Silver Member
Ive seen them at TSC. dont know the price though. The only attachment i have a slip clutch on is my tiller. Everything else is shear bolts.
Larry
Larry
GSS
Gold Member
I got the TSC one for about $90. Yes! Shorten your PTO shaft. While a newbie, I had a bad break b/c I didn't shorten the shaft after installing it and tried raising the tiller a little farther than I didn't know was possible. <BANG!> I don't want to talk about it...