skidsteer quick attach dimensions

[tawilson]

Someone here once posted a sketch of the actual skidsteer attachment dimensions. I thought I saved it, but alas, no. I tried a search to no avail.
Can anyone help?

 

[bones1]

The general width of a modern quick tach measures 44" from the outside to outside. There should be two levers that each push one pin down out of the bottom of the Quick Tach (total = 2 pins). The pins measure 32" on center. These pins line up with slots in the attachment. When the top of the Quick Tach engages with the lip on the top of the attachment and the pins are slid down into place, you will have a positive connection

 

[tawilson]

Thanks for the reply. I found the thread that had the link, but the link isn't working.
http://www.tractorbynet.com/forums/showthread.php?t=69981&highlight=quick+attach