Size of hexagonal socket bolts on BX grill guard

   / Size of hexagonal socket bolts on BX grill guard #1  

RayCo

Veteran Member
Joined
Jul 24, 2005
Messages
1,039
Location
Chester County, PA
Tractor
Kubota BX24, Case 580 Super L
Hi group.

I want to stop on the way home from work today to pick up a hex key socket or a set of them so that I have one that is large enough for the bolts that hold the grill guard on the BX tractors. Does anyone know the size of those bolts offhand, or at least know if they're either SAE or metric?

Thanks
 
   / Size of hexagonal socket bolts on BX grill guard #2  
I'd say there most likley metric. I like the allen wrenches with a "ball" on the end of them. It allows you to use the tool at an angle.
 
   / Size of hexagonal socket bolts on BX grill guard
  • Thread Starter
#3  
Thanks for the guess, but I'm wondering if anyone knows. Is that a GN in your avatar?
 
   / Size of hexagonal socket bolts on BX grill guard #4  
The bolt is metric. The hex wrench size is 10mm, which was the largest size in my metric set.

The nut on the inside requires a 17mm wrench.

Hope this helps,

Jim
 
   / Size of hexagonal socket bolts on BX grill guard
  • Thread Starter
#5  
That's outstanding. Thanks Jim. And I was just walking out the door. Now I can stop at Sears Hardware on the way.
 
   / Size of hexagonal socket bolts on BX grill guard #6  
And the first time it's removed it might take a surprising amount of muscle!
 
   / Size of hexagonal socket bolts on BX grill guard #7  
Thanks for the guess, but I'm wondering if anyone knows. Is that a GN in your avatar?

It's a monte ss, I've owned it for 11 yrs. now. It's a fun street/strip car, It runs 7.80's in the 1/8th
 
   / Size of hexagonal socket bolts on BX grill guard #8  
The bolt is metric. The hex wrench size is 10mm, which was the largest size in my metric set.

The nut on the inside requires a 17mm wrench.

Hope this helps,

Jim

Mine dont take a wrench,i welded them to the frame so i didnt have the hassle:)Quick job to remove it now without standing on my head:D
ALAN
 
   / Size of hexagonal socket bolts on BX grill guard
  • Thread Starter
#9  
It's a monte ss, I've owned it for 11 yrs. now. It's a fun street/strip car, It runs 7.80's in the 1/8th

Excellent! I have an 87 Cutlass that I [honestly!] estimate at being a mid-13 car in the 1/4 mile. Of course, this was before it sat in my back yard not being driven for three years and now needs some work... It has an Olds 403 (small block) bored to 409 with all the typical goodness in it. I love love love the G bodies.
 
   / Size of hexagonal socket bolts on BX grill guard #10  
The grille guard on the Kubota BX25D is held in place using (4) HHCS M14 x 50mrn bolts, nuts, and washers.
 

Tractor & Equipment Auctions

2018 Chevrolet Camaro 1LT Coupe (A56859)
2018 Chevrolet...
2014 Ford Taurus (A56859)
2014 Ford Taurus...
2024 Superior Utility Trailer, VIN # 4M8EZ1426RD000880 (A57453)
2024 Superior...
Trailmobile Van Trailer (A56436)
Trailmobile Van...
2014 Ford Taurus Sedan (A56859)
2014 Ford Taurus...
2025 FUTURE X-DM43 SKID STEER DISC MULCHER (A58216)
2025 FUTURE X-DM43...
 
Top