Single Hydraulic Line implement for Deere 4600

   / Single Hydraulic Line implement for Deere 4600 #1  

dcraytor

New member
Joined
Apr 27, 2014
Messages
14
Location
Knoxville, MD
Tractor
Deere 4600
So I recently acquired a Woods D80-2 Bush hog, that has a single hydrualic line for raise and lower rear wheels.

My SCV has hydraulic connections. Do I just plug the single hose into the one hydraulic port and it will work? I'm a little nervous as I have used only implements that had a pair of hydraulic lines.
 
   / Single Hydraulic Line implement for Deere 4600 #2  
Try it, should not be a problem. Can't hurt anything. Likely it is a single acting cylinder and uses the weight of the bush hog to return the cylinder and bush hog.

I use a single acting cylinder to raise my snow plow blade and only use one line to the cylinder.
 
   / Single Hydraulic Line implement for Deere 4600 #3  
No problem at all. The system will go into relief while the implement is lowering, but that won't cause any issues.
 

Tractor & Equipment Auctions

Pallet of (8) 10 Lug Misc Wheels (A48837)
Pallet of (8) 10...
22007 (A48082)
22007 (A48082)
2003 Sterling L7500 Day Cab Truck Tractor (A46683)
2003 Sterling...
INSPECTION (A48837)
INSPECTION (A48837)
2019 INTERNATIONAL LT625 TANDEM AXLE SLEEPER (A45679)
2019 INTERNATIONAL...
Cascade Hydraulic Grapple Excavator Attachment (A49346)
Cascade Hydraulic...
 
Top