Simple 3PH Ballast for FEL
- Thread starter npalen
- Start date
- Views: 1157
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,281
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
OP
npalen
Elite Member
As a side note, our son was needing a way to compact some fill dirt between two buildings just far enough apart to drive the tractor thru.
The tractor would, of course, pack along the sides but was needing something for the middle between the tires.
The ballast shown above came into double duty using the 3PH with the flow control valve completely backed off to allow free flow. Dropping the 3PH position control lever would drop the weight with a kuhwump! Then move ahead a foot or so and give it another kuhwump freefall.
The tractor would, of course, pack along the sides but was needing something for the middle between the tires.
The ballast shown above came into double duty using the 3PH with the flow control valve completely backed off to allow free flow. Dropping the 3PH position control lever would drop the weight with a kuhwump! Then move ahead a foot or so and give it another kuhwump freefall.
