Simple 3PH Ballast for FEL

   / Simple 3PH Ballast for FEL #1  

npalen

Elite Member
Joined
Nov 17, 2009
Messages
3,478
Location
Beloit, KS
Tractor
Kubota B9200 HSTD and Mahindra 3015
Just a piece of 3/4" all-thread attaching the old wheel weights to a 3PH crossbar. I removed the tractor drawbar to keep the weights from banging on it.
 

Attachments

  • 4IN1-11.jpg
    4IN1-11.jpg
    195.2 KB · Views: 87
   / Simple 3PH Ballast for FEL #2  
good idea..JPG
 
   / Simple 3PH Ballast for FEL
  • Thread Starter
#3  
As a side note, our son was needing a way to compact some fill dirt between two buildings just far enough apart to drive the tractor thru.
The tractor would, of course, pack along the sides but was needing something for the middle between the tires.

The ballast shown above came into double duty using the 3PH with the flow control valve completely backed off to allow free flow. Dropping the 3PH position control lever would drop the weight with a kuhwump! Then move ahead a foot or so and give it another kuhwump freefall. :)
 
 

Tractor & Equipment Auctions

2023 New Holland CR10.90 Combine - 332 Engine Hours - 244 Separator Hours (A51039)
2023 New Holland...
Flat Deck Trailer (A50322)
Flat Deck Trailer...
Killbros 260 Seed Conveyor (A51039)
Killbros 260 Seed...
2014 Ford Fusion Sedan (A48082)
2014 Ford Fusion...
2025 K1912 UNUSED Metal Livestock Shed (A50860)
2025 K1912 UNUSED...
2013 Ford F-150 4x4 Ext. Cab Pickup Truck (A48081)
2013 Ford F-150...
 
Top