Shibaura Sp154

[armyof1]

Yes My Shibaura Sp154 oil level is way over full and the tran way low. Where do I need to start at the Hyd pump on the side of motor are split the tractor. Thank for any help Sam

 

[lens12]

Your hydraulic internal seals are blown. There are not parts available for the hydraulic pump. I can supply a pump from an aftermarket supplier at a cheaper cost than from the manufacture or I also have a used pump.

 

[armyof1]

Your hydraulic internal seals are blown. There are not parts available for the hydraulic pump. I can supply a pump from an aftermarket supplier at a cheaper cost than from the manufacture or I also have a used pump.

So are you saying the Hyd pump on the side of the motor has bad seals. If so why can't it be match up for new seals

 

[lens12]

The shaft seal can be replaced , but it is not made to hold the hydraulic pressure. Most manufactures do not supply the internal seals . When they blow the pump needs to be replaced.

 

[armyof1]

I going to try and rebuild it. Where I work at we do Hyd work all the time. I will mic the seal and see what I can come up with. And if I can't rebuild it I will buy one from you.