bironacad
Platinum Member
I bought a tractor this last winter with some attachments one of which is a hoe. This weekend will be my first time using a hoe and wanted some input from those using hoes on subcompacts. Thanks:thumbsup:
Backhoe Shared experience for novice please.
- Thread starter bironacad
- Start date
- Views: 1567
nickel plate
Veteran Member
Do you have the Operator's Manual for the BH? If not, get one as it will walk you through the basics.
You might also post what make and model BH you have for some specific owner/operator experiences.
You might also post what make and model BH you have for some specific owner/operator experiences.
Jimbrown
Veteran Member
What the heck just pick someplace that you don't care about and practice digging until you think you know how. Ought to take all of 30 minutes before you think you are an expert.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
sub frame or 3pt?
soundguy
soundguy
OP
bironacad
Platinum Member
factory subframe
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
whew.. good!
soundguy
soundguy