It has a barcode on it. Would that be a "of the shelf" unit. If so how would that pass as a hitch.
I don't even see where it was modified, if it was.
Stranger things have passed regulations.
Al
Share Pics of People Hauling or Towing Something Wrong
- Thread starter 94BULLITT
- Start date
- Views: 4776788
It has a barcode on it. Would that be a "of the shelf" unit. If so how would that pass as a hitch.
I don't even see where it was modified, if it was.
Stranger things have passed regulations.
Al
herringchoker
Platinum Member
And all these years I've been installing them backwards!
xzcVAbc5
Gold Member
It has a barcode on it. Would that be a "of the shelf" unit. If so how would that pass as a hitch.
I don't even see where it was modified, if it was.
Stranger things have passed regulations.
Al
It was off the shelf once upon a time. There are holes on the side where they should be. Someone must have modified for a specific purpose. Maybe they needed a drop hitch and didn't think it was worth putting a receiver hitch on the truck.
edkemper
Gold Member
- Joined
- Dec 1, 2013
- Messages
- 296
- Location
- Klamath Falls, Oregon
- Tractor
- JD 210LE, Case 580CK Series B Backhoe, 1991 WoodMizer LT40 Log Mill, 1989 JD450E Crawler Tractor, FordsonMajorDiesel
It was made by someone with a specific need and not enough knowledge of mechanics and safety to make safe choices. I would think this would merit a traffic stop for safety.
xzcVAbc5
Gold Member
Essentially this whole thread.
edkemper
Gold Member
- Joined
- Dec 1, 2013
- Messages
- 296
- Location
- Klamath Falls, Oregon
- Tractor
- JD 210LE, Case 580CK Series B Backhoe, 1991 WoodMizer LT40 Log Mill, 1989 JD450E Crawler Tractor, FordsonMajorDiesel
The best post of the year. :thumbsup:
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,956
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
So long as you apply the trailer brakes first it should work ok, right?
TomSeller
Super Member
Yeah, but first the manufacturer should be tracked down and put out of business.
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,354
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
The part is a simple trailer hitch that would normally slide into the 2" receiver mounted to the vehicle.
The Ball is mounted to the square part that slides into the receiver...
The part bolted to the bumper is where the ball is supposed to be mounted.
Someone took an off the shelf part and reversed it to achieve a "Drop" hitch...
The Ball is mounted to the square part that slides into the receiver...
The part bolted to the bumper is where the ball is supposed to be mounted.
Someone took an off the shelf part and reversed it to achieve a "Drop" hitch...
