Service Manual
- Thread starter Larry_T
- Start date
- Views: 1527
rbarker
Platinum Member
</font><font color="blue" class="small">( Did anyone buy the service manual for thier tractor.is it worth the money. I think mine would run about $169. )</font>
I bought one but only paid about $79. It comes in loose leaf style and you have to put it in your own binder. I've used it a bit and figure it's a pretty cheap investment for a tractor I'll have for 20 or 30 years. YMMV!
I bought one but only paid about $79. It comes in loose leaf style and you have to put it in your own binder. I've used it a bit and figure it's a pretty cheap investment for a tractor I'll have for 20 or 30 years. YMMV!
higgy
Platinum Member
- Joined
- Jul 7, 2003
- Messages
- 590
- Location
- mid-south idaho
- Tractor
- Kuota L3130, Ford 9-n, Allis AC, and a JD 4020 with powershift
I bout one as well, I think it cost about 80.00, and it too was a loose leaf format. It was for a L 3130.
Dane
Dane
texbaylea
Veteran Member
- Joined
- Feb 6, 2004
- Messages
- 1,923
- Location
- Brazos County Texas 77808
- Tractor
- Kubota L3130HST w/LA723 loader
I purchased the service manual for the Grand L series at a cost of $82 and change. The price you quote must include the parts manual mbut you can get that for download from www.tractorsmart.com. I have always bought the service manuals for my cars, trucks and tractors. Money well spent and saved many times over in self repair or knowing what the problem was before going to the dealer.
Vernon
Vernon
sneaky_pete
Platinum Member
- Joined
- Aug 10, 2004
- Messages
- 677
- Tractor
- Kubota B7400HSD, G1800
Look on Ebay; if you're patient you can get one cheaper there. But I agree with the other posts - with the money already invested in a quality tractor, manuals, oil, and filters are cheap.
Pete
Pete
DanR67
Silver Member
301o
I think my service manual ran @ $74. While most of it is defintely aimed at the dealer / service department - there is a whole lot more content than the owners manual that makes it worthwhile: for example - there are detailed troubleshooting charts for each major sub-system (ex. electrical, engine, transmission etc.) - so hopefully you can find an answer there if you need it.
While I'm certainly willing to roll-up my sleeves & get my hands dirty - there's no way I'm going to even attempt some of the repairs / disassemblies that they show! (like splitting the tractor in half to work on a section of the HST or clutch!!! /forums/images/graemlins/shocked.gif)
If you're planning on doing all the fluid / filters changes - and at least attempting *minor* repairs yourself - then I think this is a *must have*.
I only wish it included better spare part breakdowns / listings. The Tractorsmart.com site doesn't have the parts overtly listed for my B7610 last I checked (but I just sent an email inquiry to be sure) - luckily my dealer is only @ 10 minutes from work - so I can swing by during lunch. Really a shame that Kubota doesn't make their dealer parts / exploded view system available on-line!
Hope that helps & happy wrenching,
Dan
I think my service manual ran @ $74. While most of it is defintely aimed at the dealer / service department - there is a whole lot more content than the owners manual that makes it worthwhile: for example - there are detailed troubleshooting charts for each major sub-system (ex. electrical, engine, transmission etc.) - so hopefully you can find an answer there if you need it.
While I'm certainly willing to roll-up my sleeves & get my hands dirty - there's no way I'm going to even attempt some of the repairs / disassemblies that they show! (like splitting the tractor in half to work on a section of the HST or clutch!!! /forums/images/graemlins/shocked.gif)
If you're planning on doing all the fluid / filters changes - and at least attempting *minor* repairs yourself - then I think this is a *must have*.
I only wish it included better spare part breakdowns / listings. The Tractorsmart.com site doesn't have the parts overtly listed for my B7610 last I checked (but I just sent an email inquiry to be sure) - luckily my dealer is only @ 10 minutes from work - so I can swing by during lunch. Really a shame that Kubota doesn't make their dealer parts / exploded view system available on-line!
Hope that helps & happy wrenching,
Dan
SeymourBota
Platinum Member
n3qik
Bronze Member
Ebay, Got mine for 35.00 + shipping. /forums/images/graemlins/grin.gif
Junkman
Super Member
</font><font color="blue" class="small">( Ebay, Got mine for 35.00 + shipping. /forums/images/graemlins/grin.gif )</font>
Is it a Kubota original or is it a aftermarket manual produced by other than Kubota????
Is it a Kubota original or is it a aftermarket manual produced by other than Kubota????
