SCV control lever stuck

   / SCV control lever stuck #1  

nckennedy

Silver Member
Joined
Jul 26, 2011
Messages
142
Location
Camillus, NY, USA
Tractor
JD 5425
Hi Guys,
We have a JD 5425 with a cab. Everything was working great but now one of the SCV control levers is stuck forward. Afraid to force it back into neutral position for fear of breaking linkage or the value. Not sure why it is stuck. Others work fine. We usually use it to angel the snow plow left or right. Any suggestions as to cause and what do now to free it up? Looks like the values are under the cab somewhere, might be a mess to try and get to! Any thoughts would be greatly appreciated.
Craig
 
   / SCV control lever stuck #2  
More than likely there's some moisture or corrosion inside cap making detent balls sticky(parts key 2)
 

Attachments

  • LVP5645________UN20OCT04.gif
    LVP5645________UN20OCT04.gif
    29.4 KB · Views: 407
   / SCV control lever stuck
  • Thread Starter
#3  
Oh I see. Just have to figure out how to get to the assembly. So may just be a matter of removing cap, spray some WD and tap on the shaft to get the spring moving again? Thanks for getting me in the right direction.
Craig
 

Tractor & Equipment Auctions

2020 CATERPILLAR 289D3 SKID STEER (A51242)
2020 CATERPILLAR...
John Deere 946 Center Pivot Rotary Mower-Conditioner (A51039)
John Deere 946...
2015 FREIGHTLINER CASCADIA DAY CAB (A51219)
2015 FREIGHTLINER...
2022 ONYX RX34 FLOOR SWEEPER (A50458)
2022 ONYX RX34...
2003 STERLING ACTERRA 11FT FLAT BED (A51222)
2003 STERLING...
2000 John Deere 770CH Articulated Motor Grader (A49461)
2000 John Deere...
 
Top