flyingcow
Veteran Member
Marshmallow Fluff Homepage. This Is It, Folks! Once you have your last fluffernutter sandwich, use that instead of a coffee can.
Salt spreader - so many choices
- Thread starter KubotaBX2670
- Start date
- Views: 4947
Marshmallow Fluff Homepage. This Is It, Folks! Once you have your last fluffernutter sandwich, use that instead of a coffee can.
k0ua
Epic Contributor
I thought s lot of coffee cans were plastic .
dstig1
Super Member
- Joined
- Apr 7, 2010
- Messages
- 5,022
- Location
- W Wisc
- Tractor
- Kubota L5240 HSTC, JD X738 Mower, (Kubota L3130 HST - sold)
150'? You don't need anything more than either the coffee can method already described or a simple walk behind spreader. Spreader may be a bit nicer, but you may need to modify the deflectors on it to keep the salt from flying out too far away.
chim
Elite Member
We have one of these at work:
SaltDogg Heavy-Duty Professional Tailgate Salt Spreader, Model# TGSUVPROA | Tailgate Salt Spreaders| Northern Tool + Equipment
Although it works very well for spreading salt, we have had to replace the motor twice in the 4 or 5 years we had it. We also had trouble with walk behind manual spreaders. The salt is really hard on any steel parts and I'm sure the spreaders don't get cleaned as they should.
SaltDogg Heavy-Duty Professional Tailgate Salt Spreader, Model# TGSUVPROA | Tailgate Salt Spreaders| Northern Tool + Equipment
Although it works very well for spreading salt, we have had to replace the motor twice in the 4 or 5 years we had it. We also had trouble with walk behind manual spreaders. The salt is really hard on any steel parts and I'm sure the spreaders don't get cleaned as they should.
OP
KubotaBX2670
New member
Thanks for all the great tips... I found this variable rate drop spreader at a local dealer.. It had been sitting in the side yard for a while.. I offered $200... And they accepted... I am going to try this out and follow up..
Online store
Online store
ds10
Member
I'm contemplating a 3 point mounted spreader. The PTO ones are too large, sadly. I am contemplating something like the SnowEx SP-325 that spreads CaCl flake. I'd mount it to a receiver that's mounted into the 3 point hitch, then wire up. I'd really like to hear from anyone who's used one of these or similarly-mounted electric-drive spreaders.
I really could use the extra weight in the rear of one of these units while using the loader to clean up after our plow guy. I don't presently clear the drive myself (though I may opt for the front blower for my BX1860 and do it myself at some point).
I really could use the extra weight in the rear of one of these units while using the loader to clean up after our plow guy. I don't presently clear the drive myself (though I may opt for the front blower for my BX1860 and do it myself at some point).
