rusty John deere 4100

[Thomas]

If the rust that deep into fenders you may have use sand blaster,follow by darn good primer before painting.

 

[kensnelling]

Welcome from Oklahoma.

Ken

 

[Henri88]

Well, here's a thread that didn't go to far, yet. :confused2:

 

[Cigar Face]

i cant beleive noone even mentioned that yet

 

[Mark Petrowicz]

Ground out your electrical system especially lights on the tractor frame , make sure u removed the rust with a wire wheel grinder or a lot of sand paper and a sanding soft block down to bare metal . once rust is removed wipe down bare metal with a acetone or similar product to remove dust , prime paint is a must .two coats kind of thin is better than one thick one, paint with what ever color you desire preferablly JD colors !!! and seal the painted area with a urethane for more rugged use and chipping resistence.

 

[Egon]

Sanding Down to bare metal may be quite an accomplishment.