Danica
Silver Member
Remember that the casting at the top of the filter head is part of the fuel delivery circuit. Check that. You said you blew through the in and out lines but you didn't mention blowing out the filter casting itself. Pay particular attention to the fuel inlet part of the casting.
I would have checked the lift pump screen first before I ordered a new pump.
Ooops, yes that’s the screen I referenced earlier. Well, I will check it and if that’s the culprit will send the new $60 lift pump back. And you’re right I did not pay much attention to the filter casting so there are two possible solutions. Thanks again (and to those who mentioned these before)