RTV 1100 Light Bars

/ RTV 1100 Light Bars #1  

Snapper Head

Silver Member
Joined
Apr 24, 2010
Messages
160
Location
South Mississippi
Tractor
2010 Kubota L3940 HST-3
I need to light up the planet from the front and back of my RTV 1100. I would prefer a plug and play fit as opposed to having to fab anything up; but the first priority is BRIGHTNESS. Willing to pay for quality.

What say ye?

Go.


Big Al
 
/ RTV 1100 Light Bars #2  
I just bought one of these as a trial for either my Ranger or tractor - Amazon.com: LED Light Bar Nilight 2 Inch 126w LED Work Light Spot Flood Combo Led Bar Off Road Lights Driving Lights Led Fog Light Jeep Lights Boat Lighting ,2 Years Warranty: Automotive

I only paid $28-something; they've gone up a little.

I was very surprised at the quality - solid aluminum housing with extensive heatsinking. Very solid steel and multi-way adjustable mounts. Unfortunately, no performance reports yet. First have to decide what to mount it on, and then have to get it done.
 
/ RTV 1100 Light Bars #3  
Definitely LED. Start Googling. Buy whatever you feel comfortable fitting to your RTV. They are low amp so wiring isn't a big issue.

Post pics of your decision!!!! :)
 
/ RTV 1100 Light Bars
  • Thread Starter
#4  
Googling is like jumping into the ocean. That's why I asked here, so I might avoid too many hours of internet searching.:D


Big Al
 
/ RTV 1100 Light Bars #6  
I bought two of these last Oct: Amazon.com: Nilight 22" 12w LED Light Bar Flood Spot Combo Work Light Driving Lights Fog Lamp Offroad Lighting for SUV Ute ATV Truck 4x4 Boat,2 Years Warranty: Automotive

51mbk0-g4gL._SL1000_.jpg


They look good on my RTV ad they really, really light up the road ahead!

IMG_20161028_183248602 (Large).jpgIMG_20161028_183253976 (Large).jpgIMG_20161028_183309700 (Large).jpgIMG_20161114_170512775 (Large).jpg
 
/ RTV 1100 Light Bars
  • Thread Starter
#7  
Looks like good stuff.

Any real difference between the Osram and Cree bulbs?


Big Al
 
/ RTV 1100 Light Bars
  • Thread Starter
#8  

Did you fabricate the mounting bar? I see the 31 inch light has a sliding mount feature, so it might be plug and play on my RTV...

Did it come with wiring harness and switch?


Big Al
 
/ RTV 1100 Light Bars #9  
Last edited:
/ RTV 1100 Light Bars
  • Thread Starter
#10  
Understood. I reckon I would need the harness. I want to avoid fabricating anything if possible, so the 31 inch unit with the 3 sliding mounts would allow for only a minimum of fab work.

I may give these a go, and if they don't hold up I will look at the Black Oak units. For the big cost differential it is worth taking a shot on the Nilight units first.


Big Al
 
/ RTV 1100 Light Bars #11  
Yup on the cost differential!! The Nilight I posted for $30 vs an equivalent Black Oak for about $365!! Acknowledging that Nilight come from "the Chyna" and some reviewers have reported leaks. But they are at least DESIGNED to comply with IP67. I figure if mine leak, they get warranted.
 
/ RTV 1100 Light Bars
  • Thread Starter
#12  
Just ordered the Nilight units to see how they work out. If they hold up, great. If not, then I'll pop for the high end gear.

Will be a couple of weeks before I can get to installing; stand by...


Big Al
 
/ RTV 1100 Light Bars #13  
Harbor Freight has a "free" coupon right now for their 18" magnetic tool holder. I believe that the mounting holes on it will just align with the mount points on the NiLight. If not, they have their 25# force circular magnets that have a 1/4" mounting hole in the center. $8 for a pair.
 
/ RTV 1100 Light Bars
  • Thread Starter
#14  
Thanks for the heads up.

Still thinking about where/how to route the wiring through the cab...


Big Al
 

Marketplace Items

1608 (A57192)
1608 (A57192)
2019 CATERPILLAR 262D3 SKID STEER (A62129)
2019 CATERPILLAR...
BUYERS PREMIUM & PAYMENT TERMS (A59908)
BUYERS PREMIUM &...
1994 SHOP MADE ENCLOSED TOOL TRAILER (A58216)
1994 SHOP MADE...
New/Unused 20x30 All Steel Carport (A61166)
New/Unused 20x30...
Freightliner Tender Truck - Adams Tender (A63118)
Freightliner...
 
Top