Rototiller for DK40SE HST

[chasemech]

Can my DK40SE HST handle a King Kutter 7' Gear Driven Tiller TG-84-YK. I need the 84" to cover my tracks (Turf Tires).

 

[EverythingAttachments]

The TG84 should work just fine with your tractor. The only time you could notice strain would be with new/difficult ground that hasn't been plowed or torn up prior to tilling.

 

[257NH]

I had a 6' tiller on my 40 horse and I didnt strain the tractor one bit,so I'm positive you will have no trouble with the 84" frankly that's what i would have bought if it was available at the time.
Brian

 

[MotorSeven]

But....you only need to worry about covering your tracks if you till in reverse

I have a 5'....no problems at all.

 

[257NH]

Only if your tilling 1 strip

But....you only need to worry about covering your tracks if you till in reverse

I have a 5'....no problems at all.

 

[MotorSeven]

Only if your tilling 1 strip

No, till a row, move over for a slight overlap, back up, drop the tiller and till another row...repeat = no tire tracks.

Oh, yes I forgot, offset your tiller to one side so the overlap side is covered.

 

[gkh7890]

Chasemech,

Go for it! You won't have any problems w/ the 84" KKII! You'll be getting a great unit!! I use a 72" and its awesome!!!!
Post some action pics, pls...:dance1:

 

[coobie]

You will be fine with that tiller.coobie