Rotary Cutter Roto tiller

[nesttun]

Does anybody know if you can run a roto tiller on a Ford Jubilee. Or is it moving so fast, not a chance.

 

[Rocky Hoffler]

I do a lot of rototilling and I use low range with HST so I control speed as needed not sure what your machine has a far as speed but you have to keep rpm's up to operate tiller and you would need to be in a low gear that would not pull tiller to fast with that eng speed.

 

[Guesseral]

I used a tiller on my Jubilee for several tears till I got different tractors. I was told it wouldn't work but it was fine. It was a little fast I had to be in 1st gear 2nd was too fast period but you will have to go over it several times to chew it up better because of going a little faster.

This just how it worked for me. I also used the same tiller on the 841 lots more power but still the same speed, of course neither one of them had an independent PTO so if I stopped I always picked the tiller up because well because it stopped.

 

[Oldstuff]

I know this post is 3 years old but to the original poster- what width was the tiller on the Jubilee? And how many HP or PTO HP is a Jubilee?

Thanks- Oldstuff