1aberg1
New member
I have a bx1800 kubota, I am looking for a rotary mower for it and am not sure what too look for, any suggestions would be appreciated. 1aberg1@verizon.net
rotary mower
- Thread starter 1aberg1
- Start date
- Views: 1425
devildog1
Veteran Member
Well Welcome. What are you looking to cut, grass, saplings, weeds? Are you looking for a finished type cut or a rough cut? Please fill out your profile so TBN members can answer your questions based on where you live.
DevilDog
DevilDog
If you are looking for a rotary cutter Hawkline makes what seems to be a good one. They are suppose to be made here in the USA and the price is about 30% less than a "name" brand one. I bought one last year, not a very pretty looking thing, it does look durable. I have not used mine yet due to I bought it over the winter due a good deal I found.
http://www.gohawkline.com/pdf/4.09_HawklineCatalog.pdf
http://www.gohawkline.com/pdf/4.09_HawklineCatalog.pdf
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
As a follow up to devildog...
Are you looking to mow a lawn (using a rear finishing mower) or a field (using a rotary cutter)?
Since I think you meant rotary cutter, the main thing is to size the cutter to your Kubota (both the HP requirements and the weight of the implement). You would best be served by a 48" cutter, IMO.
The Kubota site or your manual should have some information about sizing implements to the tractor.
Are you looking to mow a lawn (using a rear finishing mower) or a field (using a rotary cutter)?
Since I think you meant rotary cutter, the main thing is to size the cutter to your Kubota (both the HP requirements and the weight of the implement). You would best be served by a 48" cutter, IMO.
The Kubota site or your manual should have some information about sizing implements to the tractor.
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,084
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
I am pretty sure your manual recommends a rotary cutter of no more than 42". The BX manuals do tend to be a bit conservative though.
I own a BX2660, but have no experience with the 1800.
I own a BX2660, but have no experience with the 1800.
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,084
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
I am "pretty sure" the early BX models were "limited category 1" while the later ones are category one.
I believe TSC XB equipment is aimed at them. Woods and Land Pride also offer models for the smaller tractors. I wasn't really sure on mine, so I talked to my dealer.
I believe TSC XB equipment is aimed at them. Woods and Land Pride also offer models for the smaller tractors. I wasn't really sure on mine, so I talked to my dealer.
