Repowering an old 6" chipper. Gas or diesel

   / Repowering an old 6" chipper. Gas or diesel #12  
If your talking about the 625LR then you might be able to make up for the loss of engine RPM by installing a larger pulley on the engine or a smaller one on the chipper rotor shaft. They normally operate using a centrifugal clutch but you could put the engine on a large hinge and use a threaded rod and handle to add tension to the belts.
 
   / Repowering an old 6" chipper. Gas or diesel #13  
Here is a new Kubota 27 HP diesel. Probably not find one any cheaper as Surplus Center has very good prices.

Ron
CCI05172016.jpg
 

Tractor & Equipment Auctions

SDLG WHEEL LOADER FORKS MAST W/ 48" FORKS (A51242)
SDLG WHEEL LOADER...
2015 FORD F-650 (A50854)
2015 FORD F-650...
2025 LandHonor LHR-DFP10 Diesel Fuel Transfer Pump with Hose Reel (A49461)
2025 LandHonor...
2021 Takeuchi TL12V2 Skid Steer (A51242)
2021 Takeuchi...
2012 FORD F-550 SUPER DUTY XLT SERVICE TRUCK (A51406)
2012 FORD F-550...
2018 Vermeer D23X30 S3 Navigator Directional Drilling Machine (A49461)
2018 Vermeer...
 
Top