Repower DR chipper shredder

[yardtime]

I checked northern tool with the model #s given me and the same motor listed on amazon specs 1/4” for the key way . Am I loopy or is this more confusing than it should be .

 

[GLyford]

Amazon may simply be wrong. Or they may have an oddball some 3rd party is trying to get rid of.

 

[RandyT]

So I checked the shaft and it’s 1” . Length looks to be just under 3” . Based on that this motor will work and it’s a great price . Now my concern is the key way . It is 1/4 on my motor and clutch pulley. The amazon motor specs state 3/8 . Any way around that ?

I think you are confusing the 3/8 listed as the keyway but they are referring to the threaded bolt hole is 3/8 From the specs I listed in my previous post it has the 1/4 keyway and all my specs came straight from the Briggs dealer portal website.

 

[Peter 315]

They make a step key..........Zoro Select Key Stock, Step, 12 In L WWGSK6-2 | Zoro.com

 

[yardtime]

With the help I’ve received from everyone I’m gonna pull the trigger and order the Briggs from amazon . Worse case scenario I’ve bookmarked the info for the stepped key . Everyone along with this site is awesome ! Thank you.

 

[Peter 315]

With the help I’ve received from everyone I’m gonna pull the trigger and order the Briggs from amazon . Worse case scenario I’ve bookmarked the info for the stepped key . Everyone along with this site is awesome ! Thank you.

:thumbsup:.................................:cool2:

 

[xtxpete]

I can't get a honda for that price......

But if it had come with a Honda, he likely wouldn't be replacing it yet!

 

[xtxpete]

This is beside the point, but still running a feed cart with the original Honda, that was new 14 years ago and its ran more than 1.5hrs every day since....