Replacing teeth on a Harley take

KeithT · Mar 29, 2020

Hello,

I am buying a used Harley take that is missing 5 teeth. I looked on you tube and no information on replacing broken teeth. Anyone have any experience with this? Is it possible? Thank you

Peter 315 · Mar 29, 2020

I think the teeth are threaded into the drum might try heat and vice grips, Found some that are weld on also..

Tags · Apr 11, 2020

They are not threaded into the drum, they are welded on and can be purchased through a Paladin dealer or a quick google search brought this up CARBIDE TOOTH - Parts & Accessories - Skid Steer - Browse By Category | Ford Distributing. I replaced 10 or so on an older skid steer harley rake i had years ago. I also just used some hard facing with my welder to build some up, that worked really well too.

zmountaineer · Apr 12, 2020

Each brand is probably somewhat different. I have a ventrac power rake which is essentially the same thing. The carbide tips have spring steel that hods it in with a separate steel collar on the outside to fill in the overhang of the hole. It allows enough play in the tip to be able to get a chisel into it to pop it out if need be.

RickB · Apr 12, 2020

Tags said:
They are not threaded into the drum, they are welded on and can be purchased through a Paladin dealer or a quick google search brought this up CARBIDE TOOTH - Parts & Accessories - Skid Steer - Browse By Category | Ford Distributing. I replaced 10 or so on an older skid steer harley rake i had years ago. I also just used some hard facing with my welder to build some up, that worked really well too.

^^^^ He is right!