I have an Iseki with 8.3-22 Rice tires on the rear and 6-12 on the front. I'm finding out that it's tough and expensive to find turf tires this size. I've noticed that a common size seems to be a 24 inch rim on the rear and a 14 inch on the front. It looks lile I have a 6 lug design. Do the standard 24 inch rims have the same lug design and is it possible to switch? I know since I have 4 wheel assist I have to maintain a 0 to 5% overdrive to the front. Anyone have any thoughts on increasing the rim size? I have the fender clearance.
Replacing Rims
- Thread starter Marada
- Start date
- Views: 1645
What Model of Iseki ? I Dont think it Matters as Long as There Matched for the gear Ratios from front to back Marada , which may be what Your talking about with the 5% .
I Have a few Extras , I,ll check the sizes & condition when it gets Light & Also check the Sizes on Mine allthough one tractor is a little bigger then the other They both have the same wheels & tire size . Might help You Figure out how big You Could go . Bob
I Have a few Extras , I,ll check the sizes & condition when it gets Light & Also check the Sizes on Mine allthough one tractor is a little bigger then the other They both have the same wheels & tire size . Might help You Figure out how big You Could go . Bob
It's a Tu 1700 F . Not a bad little tractor. Seems to have plenty of power. Over the last year I've been keeping my eyes open and now have a Finish Mower, Landscape Rake, 5 foot blade and a loader. Looking for a backhoe now. If I'm able to switch to a 24 inch rim I'm thinking that will help with a backhoe. More room to build a sub frame.
cowboy357
I am looking for rims for Iseki front 6X12 with 3 3/16 " center. If you have 2 in good condition let me know. garae2@msn.com
I live in Azorina !
I am looking for rims for Iseki front 6X12 with 3 3/16 " center. If you have 2 in good condition let me know. garae2@msn.com
I live in Azorina !
