Replaced dash park brake indicator micro switch - pics

   / Replaced dash park brake indicator micro switch - pics #1  

Mousefield

Veteran Member
Joined
Aug 24, 2008
Messages
2,482
Location
Qualicum Beach on Vancouver Island, BC. Canada
Tractor
Sold 2008 CK35 HST
My dash park brake light was staying on all the time. I had tightened the lever, which was a bit loose, but it still stayed on all the time. The steel spring on top was going up and down so figured the switch was stuck, played around with it a bit but stayed stuck. Got a replacement from my dealer and replaced it. First I took off the black fuse box. Then I tried to unscrew the micro switch, no way was it coming off. :mad: So then took the shiny plate that the micro switch was screwed through by removing the two bolts holding the plate on. Once the plate came off I saw why the micro switch was not coming off. :thumbsup: The two long skinny bolts through the micro switch had nuts on the back. :p Once I could grab the nuts then I could unscrew the bolts holding the micro switch to the shinny plate. Got it back together and it is working properly. :D
 

Attachments

  • DashbrakeSwitch 001.jpg
    DashbrakeSwitch 001.jpg
    213.3 KB · Views: 301
  • DashbrakeSwitch 002.jpg
    DashbrakeSwitch 002.jpg
    234.9 KB · Views: 261
  • DashbrakeSwitch 003.jpg
    DashbrakeSwitch 003.jpg
    264.2 KB · Views: 286
   / Replaced dash park brake indicator micro switch - pics #2  
My dash park brake light was staying on all the time. I had tightened the lever, which was a bit loose, but it still stayed on all the time. The steel spring on top was going up and down so figured the switch was stuck, played around with it a bit but stayed stuck. Got a replacement from my dealer and replaced it. First I took off the black fuse box. Then I tried to unscrew the micro switch, no way was it coming off. :mad: So then took the shiny plate that the micro switch was screwed through by removing the two bolts holding the plate on. Once the plate came off I saw why the micro switch was not coming off. :thumbsup: The two long skinny bolts through the micro switch had nuts on the back. :p Once I could grab the nuts then I could unscrew the bolts holding the micro switch to the shinny plate. Got it back together and it is working properly. :D

Sounds like you have the problem fixed for sure.. I sent you an E- Mail as
requested.. Doesn't take much to knock them out of adjustment or have dirt get into them and screw them up. The installation on the CK30 HST is a little different then your tractor but works the same ...
The Fox.
 

Tractor & Equipment Auctions

2015 FORD F750 BOX TRUCK (A51219)
2015 FORD F750 BOX...
2019 Caterpillar 815K Articulated Compactor (A49461)
2019 Caterpillar...
2000 MACK RD688 TRI AXLE DUMP  TRUCK (A51222)
2000 MACK RD688...
Vermeer Vac Trailer (A49461)
Vermeer Vac...
2018 Toro Grounds Master 7200 72in Zero Turn Commercial Mower (A50324)
2018 Toro Grounds...
Case 84in Hydraulic Hopper Sweeper/Broom Skid Steer Attachment (A49461)
Case 84in...
 
Top