Removing oil pan on a Y385 on a Agracat 2940 engine build date 1999.

   / Removing oil pan on a Y385 on a Agracat 2940 engine build date 1999. #11  
That's too bad, and a lot of work to get to the oil pump. Maybe that is why the design changed later on.
At least now you know. Best of luck getting it fixed and please do post an update when you do find what caused the loss of pressure.
 
   / Removing oil pan on a Y385 on a Agracat 2940 engine build date 1999. #12  
Wow, that's crazy. I'd be real tempted to cut a hole in the bottom of the pan and make a gasketed cover plate, providing I knew exactly where the pump was, and how it is mounted.
 
   / Removing oil pan on a Y385 on a Agracat 2940 engine build date 1999.
  • Thread Starter
#13  
Yeah he said I didn’t need to put those 4 bolts back in and just to use rtv heavy there on reassembly . He said others have done this and it’s fine. It would be much easier if I didn’t have a loader attached . That has to be completely taken off .
 
   / Removing oil pan on a Y385 on a Agracat 2940 engine build date 1999. #14  
In case you're interested in not splitting the tractor. The oil pan surface should be perfectly flat.

Crankcase access cover.jpg
 

Tractor & Equipment Auctions

HANG ON 48" CATERPILLAR FORKS (A51242)
HANG ON 48"...
2018 John Deere S780 Combine (A50657)
2018 John Deere...
2022 Case IH 8250 4WD Combine (A50657)
2022 Case IH 8250...
2019 Bobcat T770 Two Speed Compact Track Loader Skid Steer (A50322)
2019 Bobcat T770...
197390 (A50459)
197390 (A50459)
2007 INTERNATIONAL 4200 SBA 4X2 DUMP TRUCK (A51243)
2007 INTERNATIONAL...
 
Top