Remotes worth it on B7500??

   / Remotes worth it on B7500?? #1  

C4Ranch

Veteran Member
Joined
Sep 9, 2011
Messages
1,049
Location
Eastland Co, Texas
Tractor
Kubota L5240 HSTC
Newbe here, just got a used Kubota B7500 hsd and was thinking about some remotes but looking through the manual appears that the pump only generates 4.4gpm...? Am I reading that right? Was thinking about wood splitter, TNT, backhoe, etc

Thanks!
 
   / Remotes worth it on B7500?? #2  
You could use the Prince LSR3060 regen valve with your tractor
 
   / Remotes worth it on B7500??
  • Thread Starter
#3  
Would that work for a BH? Just wondering if I should even mess with a remote given that flow rate or if it would be best to begin considering a pto driven pump?
 
   / Remotes worth it on B7500?? #4  
I suggested that valve for the log splitter valve.

For remotes, any of the open center valves would work, 1 to 4 spool valve.
 
   / Remotes worth it on B7500??
  • Thread Starter
#5  
Thanks JJ! Newbe here so I am unsure of the gpm requirements for many implements and if these specs are right for my 7500? Seem kinda anemic..
 
   / Remotes worth it on B7500?? #6  
Thanks JJ! Newbe here so I am unsure of the gpm requirements for many implements and if these specs are right for my 7500? Seem kinda anemic..

Probably about right. We have a B7500 with a loader and I made some adapters to connect the loader valve to a 1/2" ag fitting. Worked well, but wasn't fast.

Aaron Z
 
   / Remotes worth it on B7500?? #7  
   / Remotes worth it on B7500?? #8  
Thanks JJ! Newbe here so I am unsure of the gpm requirements for many implements and if these specs are right for my 7500? Seem kinda anemic..

The thing about hyd power, is you have to have the HP to drive the pump and the other functions of the tractor.

Since you only have about 21 HP, the largest pump you could use would be a 10 GPM pump at 3000 psi. That is the HP just to drive the pump. Anything less in pressure and GPM will take less HP to run it.

You can still run just about anything hyd with what you have, just slower.

Speed of operation is relative to hyd GPM that you have, and the potential force is relative to the pressure the pump can develop.

You have 7 GPM total, so some of that is for the PS, which leaves you with 4.4 GPM to work with.
 

Tractor & Equipment Auctions

CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
2011 FREIGHTLINER M2 26FT BOX TRUCK (A50505)
2011 FREIGHTLINER...
2010 Case 650L Crawler Tractor Dozer (A50322)
2010 Case 650L...
2021 FORD F-150 XL EXT CAB TRUCK (A51406)
2021 FORD F-150 XL...
2018 Dodge Ram 5500 Bucket Truck - 4x4, Versalift VST40, 45FT Reach, Dakota Line Body (A51039)
2018 Dodge Ram...
2015 JOHN DEERE 744K-II HIGH LIFT WHEEL LOADER (A51242)
2015 JOHN DEERE...
 
Top