Cycledude
Veteran Member
- Joined
- Nov 26, 2020
- Messages
- 1,549
- Location
- Rib Lake Wisconsin
- Tractor
- LS XR4155, Ford 6610, Ford 8n
A little WD40 about once a year seems to keep mine working pretty well.
Releasing stuck hood
- Thread starter shooterdon
- Start date
- Views: 3779
-
- Tags
- stuck
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 28,964
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Most tractor hoods appear to be 'flexible flyers', my M9's are no exception. I keep the mechanism well oiled and I'm careful not to slam it down.
OP
shooterdon
Elite Member
- Joined
- Nov 24, 2012
- Messages
- 4,838
- Tractor
- 2019 LS XR4140 HST Cab; 2020 Kawasaki Mule SX; 2021 Bad Boy 54" ZT Elite
I got it open. A log had hit the hood just right and bent thing up. I am using a bungee cord to hold it now.
I will see what the parts cost to repair the damage but I fear ur will nor be cheap.
H
Getting a grill guard on order. Should have done that first….dummy!
I will see what the parts cost to repair the damage but I fear ur will nor be cheap.
H
Getting a grill guard on order. Should have done that first….dummy!
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 28,964
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Try your local bump shop. I had a coup0le huge dents in the hood of my M9 open station when I bought it and had the local bump shop in Carleton, Michigan repair and repaint it and it was very reasonable, like under 200 bucks and it looks like new. I did also have to buy a new grill and latch mechanism but I got that at cost from my dealer where I work part time. Even replaced the decals. You'd never know the previous owner had a boo-boo.
I did remove the hood myself and take it to them. Kubota hoods are really easy to remove. There is an orange plastic plug button near the operators station and you remove that, take a small screwdriver and slide the overlapping collar to the side and it comes right off. Of course you have to remove the front strut as well and that had a spring clip attachment. Think the grill and the decals were under 200 bucks as well.
I did remove the hood myself and take it to them. Kubota hoods are really easy to remove. There is an orange plastic plug button near the operators station and you remove that, take a small screwdriver and slide the overlapping collar to the side and it comes right off. Of course you have to remove the front strut as well and that had a spring clip attachment. Think the grill and the decals were under 200 bucks as well.
