recycled plow

   / recycled plow #1  

soarkrebel1

Silver Member
Joined
Apr 12, 2004
Messages
100
Location
arkansas
Tractor
Kubota L3000dt
Here a spring tooth harrow I built from an old pull type harrow that was sitting in the woods of an old farm I hunt. It had small trees growing through it and I had to pull it out with my tractor.

The landowner said please haul it off saying it was trash!

So my son and I had to cut it into pieces with a oxy/acy torch and haul it off. I took part of the original frame and made it a new frame. The three point top part is from an old brush hog that also was rusting away.

I have very little money in it and it works great. So far my Kubota has had no trouble pulling it and if it does I can just remove a tooth or two.

One persons junk is anothers treasure!
 

Attachments

  • plow1.jpg
    plow1.jpg
    192.7 KB · Views: 1,369
  • plow2.jpg
    plow2.jpg
    185.5 KB · Views: 1,015
  • plow3.jpg
    plow3.jpg
    199.7 KB · Views: 1,000
   / recycled plow
  • Thread Starter
#2  
This is what is left from the old plow and I am already thinking of use's for this metal.
 

Attachments

  • plow4.jpg
    plow4.jpg
    198.2 KB · Views: 1,062
   / recycled plow #3  
Hmm, I see a guide wheels prodject in your future.... :>)
 
   / recycled plow #4  
Do you want to sale those rim's I will buy them.If they are still good . Don't care it they have rust on them if they don't have holes in them.
 
   / recycled plow
  • Thread Starter
#5  
I wonder what the shipping would be to south carolina from arkansas?
 
   / recycled plow #6  
soarkrebel1 said:
Here a spring tooth harrow I built from an old pull type harrow that was sitting in the woods of an old farm I hunt. It had small trees growing through it and I had to pull it out with my tractor.

The landowner said please haul it off saying it was trash!

So my son and I had to cut it into pieces with a oxy/acy torch and haul it off. I took part of the original frame and made it a new frame. The three point top part is from an old brush hog that also was rusting away.

I have very little money in it and it works great. So far my Kubota has had no trouble pulling it and if it does I can just remove a tooth or two.

One persons junk is anothers treasure!
I wonder what one of those would have cost from your dealer for your tractor. You made out like a bandit.:cool:
 
   / recycled plow #7  
Nice to see some of yesterday's iron come a live again...nice job!!!
 
   / recycled plow #8  
That ground hole plow is now a chisel plow.That is a nice plow.If the ground is dry it will make it like power.
 
   / recycled plow #9  
That is a spring tooth cultivator. It was used to till between crop rows to control weeds, got a few hours experience on them. You did a real nice job on the rebuild and it should be a handy implement.
 
   / recycled plow #10  
Job well done. Should work just fine for you.


murph
 

Tractor & Equipment Auctions

2012 Hyundai Genesis Sedan (A51694)
2012 Hyundai...
2017 POLARIS RANGER 570 4X4 PROSTAR UTV (A51406)
2017 POLARIS...
Chevrolet Silverado 1500 Crew Cab Pickup Truck (A52377)
Chevrolet...
2001 INTERNATIONAL 2574 6X4 DUMP TRUCK (A51406)
2001 INTERNATIONAL...
12 in Large Excavator Bucket (A52377)
12 in Large...
2008 Chevrolet Impala Sedan (A51694)
2008 Chevrolet...
 
Top