recycled plow

   / recycled plow #1  

soarkrebel1

Silver Member
Joined
Apr 12, 2004
Messages
100
Location
arkansas
Tractor
Kubota L3000dt
Here a spring tooth harrow I built from an old pull type harrow that was sitting in the woods of an old farm I hunt. It had small trees growing through it and I had to pull it out with my tractor.

The landowner said please haul it off saying it was trash!

So my son and I had to cut it into pieces with a oxy/acy torch and haul it off. I took part of the original frame and made it a new frame. The three point top part is from an old brush hog that also was rusting away.

I have very little money in it and it works great. So far my Kubota has had no trouble pulling it and if it does I can just remove a tooth or two.

One persons junk is anothers treasure!
 

Attachments

  • plow1.jpg
    plow1.jpg
    192.7 KB · Views: 1,369
  • plow2.jpg
    plow2.jpg
    185.5 KB · Views: 1,014
  • plow3.jpg
    plow3.jpg
    199.7 KB · Views: 1,000
   / recycled plow
  • Thread Starter
#2  
This is what is left from the old plow and I am already thinking of use's for this metal.
 

Attachments

  • plow4.jpg
    plow4.jpg
    198.2 KB · Views: 1,062
   / recycled plow #3  
Hmm, I see a guide wheels prodject in your future.... :>)
 
   / recycled plow #4  
Do you want to sale those rim's I will buy them.If they are still good . Don't care it they have rust on them if they don't have holes in them.
 
   / recycled plow
  • Thread Starter
#5  
I wonder what the shipping would be to south carolina from arkansas?
 
   / recycled plow #6  
soarkrebel1 said:
Here a spring tooth harrow I built from an old pull type harrow that was sitting in the woods of an old farm I hunt. It had small trees growing through it and I had to pull it out with my tractor.

The landowner said please haul it off saying it was trash!

So my son and I had to cut it into pieces with a oxy/acy torch and haul it off. I took part of the original frame and made it a new frame. The three point top part is from an old brush hog that also was rusting away.

I have very little money in it and it works great. So far my Kubota has had no trouble pulling it and if it does I can just remove a tooth or two.

One persons junk is anothers treasure!
I wonder what one of those would have cost from your dealer for your tractor. You made out like a bandit.:cool:
 
   / recycled plow #7  
Nice to see some of yesterday's iron come a live again...nice job!!!
 
   / recycled plow #8  
That ground hole plow is now a chisel plow.That is a nice plow.If the ground is dry it will make it like power.
 
   / recycled plow #9  
That is a spring tooth cultivator. It was used to till between crop rows to control weeds, got a few hours experience on them. You did a real nice job on the rebuild and it should be a handy implement.
 
   / recycled plow #10  
Job well done. Should work just fine for you.


murph
 

Tractor & Equipment Auctions

2013 Nissan Pathfinder SUV (A51694)
2013 Nissan...
6ft Field King 3 Point Hitch Tiller (A51573)
6ft Field King 3...
2015 Jeep Compass SUV (A50324)
2015 Jeep Compass...
2019 Fontaine Traverse HT T/A 48ft. 41 Ton Hydraulic Dovetail Equipment Trailer (A52377)
2019 Fontaine...
SULLAIR 185 PORTABLE AIR COMPRESSOR (A51406)
SULLAIR 185...
2014 Ford Taurus SE Sedan (A51694)
2014 Ford Taurus...
 
Top