jwbrown743
New member
got any good tricks?
rebuid 743 bobcat hyd. control valve
- Thread starter jwbrown743
- Start date
- Views: 2116
deerseeker001
Super Member
- Joined
- Jul 20, 2011
- Messages
- 5,699
- Location
- Central wisconsin
- Tractor
- International 2500a with Loader
Welcome from Wisconsin
wdchyd
Elite Member
Welcome JWBrown,
What is the complaint?
Leaks?
Creep-down?
Low pressure?
Sticky spool?
What is the complaint?
Leaks?
Creep-down?
Low pressure?
Sticky spool?
Briana03
Elite Member
Welcome to TractorByNet!
I moved your thread to the Construction Equipment forum.
I moved your thread to the Construction Equipment forum.
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Is it a stacked valve or a monoblock valve.
If the spools do have seals on the shaft, they are there to keep dirt out.
On the stacked valves, you can replace the o-rings between the stacks.
You can't replace spools as they are a precision fit, and the bore of the valve is probably worn.
You can obtain replace valves, that will do the job if they will fit the space allowed.
