cedarranch
Silver Member
I sure hope those speeds were in the line of duty. /w3tcompact/icons/grin.gif
Rear tire inflation
- Thread starter alan40
- Start date
- Views: 7877
Bird
Rest in Peace
Second one was; first one was when I was dumb kid without sense enough to know better./w3tcompact/icons/laugh.gif
bgott
Veteran Member
O.K., Sounded like an interesting ride. I've blown a bunch of tires at 100 m.p.h. speeds. I lived out in the middle of Nevada when I was a kid and drove those speeds daily. It's a [censored] shame you can't pick up a hundred dollar car that can run 130 or 140 after a tune up these days. 
I've blown tires and had them take a fender off before I could get the car stopped. Two blown tires at once was good for a ride through the desert. I'd much rather blow a front tire. All you'd have to do was hold on and point it straight and you could get it stopped O.K.. A back tire would try, and sometimes succeed, to spin you. The worst thing to have happen is to throw the tread and not have the tire lose air pressure. The combination of a severely out of balance tire and two or three feet of tread flying around at that speed makes for a really interesting time!
I've blown tires and had them take a fender off before I could get the car stopped. Two blown tires at once was good for a ride through the desert. I'd much rather blow a front tire. All you'd have to do was hold on and point it straight and you could get it stopped O.K.. A back tire would try, and sometimes succeed, to spin you. The worst thing to have happen is to throw the tread and not have the tire lose air pressure. The combination of a severely out of balance tire and two or three feet of tread flying around at that speed makes for a really interesting time!Pks
Platinum Member
- Joined
- Apr 6, 2000
- Messages
- 773
- Location
- Saline, Michigan
- Tractor
- Kubota L3700SU, Cub Cadet 1430, Hustler Super-Z 66in, Vermeer 1250
Bird,
"Uniroyal's recommended minimum, "
That is exactly what I was trying to say. The minimum from the tire maker is more important. And that's what I follow.
Peter
"Uniroyal's recommended minimum, "
That is exactly what I was trying to say. The minimum from the tire maker is more important. And that's what I follow.
Peter
gordon
Veteran Member
Here is how I came up with the approx. pressure to run in my tires. Went to the tire web site and looked up my tire, then roughly calculated the weight on the tires and started high in pressure and have been working them down a pound at a time.
Here is a link to the firestone all traction utility tire.<A target="_blank" HREF=http://www.firestoneag.com/tiredata/ag/rear_tractor/rtr_atu.asp>http://www.firestoneag.com/tiredata/ag/rear_tractor/rtr_atu.asp</A>
Gordon
Here is a link to the firestone all traction utility tire.<A target="_blank" HREF=http://www.firestoneag.com/tiredata/ag/rear_tractor/rtr_atu.asp>http://www.firestoneag.com/tiredata/ag/rear_tractor/rtr_atu.asp</A>
Gordon
