Rear Remote

[John_Mc]

<font color=blue>My rear remote kit cost 225.00 and included everything for the first set of remotes.</font color=blue>

For clarity for those considering adding TNT to their tractors, I assume this price was for one control valve and remote outlet (and plumbing?). This would NOT include the cylinder and hoses to replace your toplink. This gets you "ready" to add a hydraulic toplink (or other hydraulically driven unit).

Please correct me if I'm wrong on the above. (If I am wrong, I paid a WHALE of a lot too much for my TNT set-up.)

 

[Bird]

You're right, John. Like it says, that's for ONE pair of remotes, and is just a start toward top 'n tilt./w3tcompact/icons/frown.gif I think I spent close to $800.

 

[kcbarnes]

You are correct, that is just the remotes to run a cyl. on an implement or top link.

 

[THEBUS]

kc,

Did you have to remove your rear tire to do the installation? If so, do your tires have water (and antifreeze) in them? I'm considering doing the same install but am concerned about moving around the heavy tire.

 

[kcbarnes]

Yes I did remove the rear tire with 250 pounds of beet juice in it. It would be a good idea to have some help to do so.And make sure you have some blocking to put under the tractor, don't rely on a jack.

 

[Anonymous Poster]

i have a nh 1520, had the dealer install the remote, cost about 225 for the kit and about 50 for the install. works well, they had the option of a single or double remote for my tractor, i just had the single put on.

alex