rear hydraulics

[rorygeorge]

I have a Yanmar 2210D and the hydraulics worked fine when I parked it a week ago. I tried to lift the rear gannon today to replace it with my brush hog and the darn thing won't rise. Nothing happens front hydraulics works fine and I have plenty of fluid. Any ideas?

 

[vongiese]

I have a Yanmar 2210D and the hydraulics worked fine when I parked it a week ago. I tried to lift the rear gannon today to replace it with my brush hog and the darn thing won't rise. Nothing happens front hydraulics works fine and I have plenty of fluid. Any ideas?

Sorry if you've checked this but gotta ask - have you thured the knob under the seat - it faces the shifter? You can lock the 3 pt in position when you tighten down that knob. Mine has locked before too - musta got bumped. Mine can be a bugger to loosen as well.
If not that maybe a clogged filter....

 

[rorygeorge]

Thanks for the help. Can you tell me where the filter is you are talking about?

 

[1danny]

Thanks for the help. Can you tell me where the filter is you are talking about?

The filter screen is in the transmission, look on the left side of the transmission and you will see 3 small screws in a triangle. Remove the screws and the cover and pull the screen out & clean. Drain transmission first.

Danny