3-Point Hitch Rear hydraulic emplement want move!

[bh27]

I have a 5065E bought from a friend and he never used rear emplement just used fron loader to haul hay. Front bucket works fine rear emplement will not move from the up position! Any suggestion to try before removing rear casing to clean valve or replace it? Any suggestions would be much appreciated.

 

[k0ua]

did you step on the lower link arms to put a little weight on them? or is there an actual implement on there? if so. and there is weight on the rear 3pt. then check the drop rate valve, usually located on the lower edge of the seat near the floorboards. Turn it counterclockwise to "loosen" the valve. If it is turned too far clockwise, it will not drop at all.

James K0UA

 

[teg]

Not 100% sure on your model but most tractors have a knob under the seat in the middle that controls the rate at which an implement lowers... it could be closed all the way. (one thing to check...)

Edit... got beaten to the punch line

 

[k0ua]

teg, gotcha by one minute


James K0UA

 

[teg]

IF I could type with two fingers, I might have had a chance :laughing:

 

[k0ua]

IF I could type with two fingers, I might have had a chance :laughing:

You always wonder what happened to them.. did they try it? did that fix it.?
:confused3:

James K0UA

 

[teg]

You always wonder what happened to them.. did they try it? did that fix it.?
:confused3:

James K0UA

You mean one Post and they are gone!!! Plenty of those posts... must be playing with their tractor and don't have time for the computer that or maybe he forgot his password and can't get back in to TBN to say Thanks!

 

[foggy1111]

You mean one Post and they are gone!!! Plenty of those posts... must be playing with their tractor and don't have time for the computer that or maybe he forgot his password and can't get back in to TBN to say Thanks!

Yep.....but that masked man left this here silver bullet. :laughing:

 

[k0ua]

Yep, so far he is a 1 post pony:laughing:

Hope he got his tractor fixed.

James K0UA

 

[teg]

...1 post pony...

Good one!!! Is that your quote or is that a common phrase on forums? (I limit myself to just TBN... so I don't get around much :ashamed

 

[k0ua]

I just made it up, kinda like a "1 trick pony" is where I got the idea.

James K0UA

 

[teg]

Good deal, we'll have to credit you since it's been documented!!!

The screwed up part was that we answered pretty quickly but his last activity was 2 minutes before your post... so I guess to answer your question above. No it didn't work since he never read the post...

Last Activity: 07-13-2011 09:22 PM

Guess we have to be faster next time!!!

 

[Kyle_in_Tex]

Hit and run!
My guess is y'all figured it out for him and he's out busy. He'll be back maybe next year with another issue but will have forgotten his password...

He's out having fun on his tractor.