I have a new 3320 and am wanting to put on some fender splash guards but I didnt want to spend what JD wants for OEM guards does anyone know of an aftermarket source for these? I have tryed to Google it and dont come up with anything. Thanks
Rear fender spash guards
- Thread starter ilmoman
- Start date
- Views: 14548
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,551
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Welcome to the forum.
What is Deere asking for them?
Do you have a part no. ?
What is Deere asking for them?
Do you have a part no. ?
JD is asking around $250.00 for the set. I dont have the part # right now I would have to go to JD.com and get it again. My dealer wouldnt come down from that price and I have checked at two different dealers. Thanks
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,551
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Does that include the complete unit...front fender, guard, and brackets?
For a set, price seems right. If just a flap to attach to the front fenders, then it is too high. IMO
Whoops! Didn't read the title very well.
For a set, price seems right. If just a flap to attach to the front fenders, then it is too high. IMO
Whoops! Didn't read the title very well.
Last edited:
Travelover
Elite Member
Can you just fab one from a stake truck mud flap?
radman1
Elite Member
- Joined
- Jul 8, 2006
- Messages
- 3,016
- Location
- midwest
- Tractor
- JD 4520, Toolcat 5610, Bobcat S300, Case-IH 125 Pro, Case-IH 245, IH 1086, IH 806
I assume the $250 price is for the rear guards. I think the front wheel covers are nearly 2x that.
Rear fender extension kit
The open station extensions will probably look nearly the same. The list price of $228 is the same as the cab version.
Trying to fabricate your own is probably not going to be easy or work as well. You should be aware, that the gaurds will probably still not cover the entire tire. Throwing mud will still be and issue, probably just less with the extensions. You will still also get mud from the back of the tire behind the fender flinging it forward.
I found a picture of the front fenders. List price $458.
Front fender kit (3000 TWENTY Series)
Rear fender extension kit
The open station extensions will probably look nearly the same. The list price of $228 is the same as the cab version.
Trying to fabricate your own is probably not going to be easy or work as well. You should be aware, that the gaurds will probably still not cover the entire tire. Throwing mud will still be and issue, probably just less with the extensions. You will still also get mud from the back of the tire behind the fender flinging it forward.
I found a picture of the front fenders. List price $458.
Front fender kit (3000 TWENTY Series)
John in the UP
Bronze Member
- Joined
- Jun 10, 2008
- Messages
- 51
- Location
- Michigan's Upper Peninsula
- Tractor
- 2021 John Deere 4066R Snow Cab
Looking at the image from the JD site, those rear fender extensions don't appear to be very wide - a couple of inches maybe?
Would something like this work?
JC Whitney has a variety of fender flare material (up to about 3 inches wide) used to protect vehicle fenders while off-roading.
If this link will work, go to JC Whitney site and use the search term "Fender Flares".
Rubber Fender Extensions Fender Flares - JCWhitney
Hope this helps,
-John
Would something like this work?
JC Whitney has a variety of fender flare material (up to about 3 inches wide) used to protect vehicle fenders while off-roading.
If this link will work, go to JC Whitney site and use the search term "Fender Flares".
Rubber Fender Extensions Fender Flares - JCWhitney
Hope this helps,
-John
Attachments
Last edited:
sunnyside360
Veteran Member
- Joined
- Aug 8, 2006
- Messages
- 1,561
- Location
- Central PA
- Tractor
- JD 3720, JD 4320, JD 835R, Kubota M4D-071, Kubota ZD1511
Front fender kit (3000 TWENTY Series)
Front fender kit
Front fender kit
The front fender kit provides protection to cab glass or the operator station from mud and debris. This kit contains two fenders, mounting brackets, and mounting hardware.
Compatible with cab and open-station models.
Code Bundle Description
LVB25686 Front fender kit (3000 TWENTY Series)
Note: Not compatible with mid-mount mower.
Last Updated : 10-Aug-2009
=========================================================
Hmmm, JD states the kit is not compatible with mmm. I have the front fenders on my 2007 JD 3720 cab tractor with mmm and have no problems whatsoever. Maybe they changed design since then.
Front fender kit
Front fender kit
The front fender kit provides protection to cab glass or the operator station from mud and debris. This kit contains two fenders, mounting brackets, and mounting hardware.
Compatible with cab and open-station models.
Code Bundle Description
LVB25686 Front fender kit (3000 TWENTY Series)
Note: Not compatible with mid-mount mower.
Last Updated : 10-Aug-2009
=========================================================
Hmmm, JD states the kit is not compatible with mmm. I have the front fenders on my 2007 JD 3720 cab tractor with mmm and have no problems whatsoever. Maybe they changed design since then.
The compatibilty with the MMM may be with the new auto connect deck. Looks like the bottom of the guard might hit the front of the deck while driving over it.
$250 for two small strips of plastic for the rear is crazy. I know Deere has to make money but that is just nuts!
$250 for two small strips of plastic for the rear is crazy. I know Deere has to make money but that is just nuts!
