Radio wiring for XR3037HC cab models

[JLwoodworks]

I swapped the factory speakers out for some 5 1/4 pioneers with very little triming, then installed the speakers from the top with factory grilles.

[/url]New stereo and speakers by Jason, on Flickr[/IMG]

[/url]New stereo and speakers by Jason, on Flickr[/IMG]

[/url]New stereo and speakers by Jason, on Flickr[/IMG]

The sound is decent along with an inexpensive pioneer head unit. I wanted something with Bluetooth to play Pandora from my phone.

[/url]New stereo and speakers by Jason, on Flickr[/IMG]

I also added a factory matched Carling switch that allows me to turn only the radio on while the tractor is off. So if I'm out doing some chores like raking or stacking wood i can have some tunes

[/url]new switch for radio. allows me to turn just the radio on while the tractor is off by Jason, on Flickr[/IMG]

Jay

 

[Doofy]

OK guys, for those of you installing aftermarket radios in your cabs here is the wiring for the factory plug.
This will be correct for all 3000 series cabs and I suspect the 4000 series cabs will be the same.
Picture 1 shows the 6 pin radio harness from tractor

Pink wire separate from the harness = 12V Battery Hot
Blue w/white stripe = 12V when ign is on
Black = Ground
Light green w/brown stripe = Right Spkr +
White w/blue stripe = Left spkr -
Green = Right spkr -
Red w/blue stripe = Left spkr +
Last thing to plug in would be the antenna wire into the radio
Second pic shows wiring from my radio (may be different colors on yours)
Also attached is a word doc for the above plug pin out.

Thanks for the LS stereo wiring info. Installed my stereo in my XR3135HC tonite and what a piece of cake. Easy. I cut off the odd ball LS connector and wired directly to the stereo connector wires. Used the heat shrink butt connectors.

 

[jay baker]

Where did you get that switch from?
How did you wire it?

 

[robertsa]

Where did you get that switch from?
How did you wire it?

Like so? Carver / Marquis 896226 Carling Technologies LS Audio Mute Boat On / Off Rocker Switch (Single) | Great Lakes Skipper

 

[AKcold]

How did the 6.5" speakers turn out and how involved to install with the spacers

 

[Maxify]

Give up and use a Blue Tooth headset. In fact, the bautiful, brand new Pioneer unit is still hanging in the cab unused, for years now.
I tried all of the rest of this and decided it was much easier. Maybe even better quality sound applied directly the audio receiver {My Ear}.
Plus I get the added feature of being in contact with the rest of the world via the cell phone.
They've got a great feature called sound deadening. "What HST whine?"

Although, the Mrs. gets really upset when, for some unexplained reason, the ringer gets "turned off".
Must be a flaw in the iPhone. "Yeah, Honey. I'll get that thing fixed."
You have a choice to make. Shake your fist at technology as it passes you by or
embrace it in whatever manner you choose.
The choice is yours. Me?
For about $150 I wifi'd the farm. Amazon:{Ubiquiti UAP-AC-M-PRO-US Unifi Access Point (Certified Refurbished)}
Carrier signal is 1-2 bars on a good day.

 

[AKcold]

Yep I pretty much have concluded I'll throw on my Bose noise cancelling headphones and call it a day

 

[Wibb]

I was doing some digging on this topic and thought I'd add in case anyone stumbles on it. I put some nice Kicker 5 1/4" in mine. I made some 4 to 5 1/4" adapter rings so I didn't have to cut the headliner and then removed the roof panel to install the backing clips for the screws. Turned out very well and made a night and day difference. If you want low end you'll have to add more, but these look factory and sound great with the Sony head unit.

 

[Avenger]

Looks awesome! Good job!

 

[3Lfarms]

Good speakers make all the difference in these cabbed tractors. I rock out in mine when mowing the pastures.