nelval
New member
My tractor (diesel, 20 HP, 3 cylinders) has a small leak on the radiator. Took it to a radiator repair shop and they want $445 to build a new core. Is there a place where I can buy a new or used (working) radiator for less? -Nelson
Radiator for Iseki Landhope TU200F
- Thread starter nelval
- Start date
- Views: 2212
Rollo13
New member
You can use radiator repair liquid. Like this Liquid Copper
I use for may Iseki TU180 and work great. Its keep closed radiator leak two years and no more new leaks.
I use for may Iseki TU180 and work great. Its keep closed radiator leak two years and no more new leaks.
Kernopelli
Veteran Member
- Joined
- Oct 16, 2006
- Messages
- 2,209
- Location
- Carterville, Illinois
- Tractor
- Mitsubishi MTE2000D, Dig It 258 Mini Ex, Deere Z930A ZTR
Of course I have no way of knowing where your leak is but I just soldered a leak in my ( Mitsubishi's) radiator. A little investigating revealed the core was copper. I simply cut away a small section of fins to reach the hole and used a small propane torch and flux core plumbing solder......gently heated the area around the hole until it was hot enough to melt the solder and ran a little over the hole/area. Fast, easy, cheap and worked great. I was going to try Bar's Leaks but had the solder on hand and wanted to get it done and knew it would work. I too have used Bar"s Leaks in the past for small automotive leaks with success.
