R1's for 4300

/ R1's for 4300 #1  

Branch

Silver Member
Joined
Jun 14, 2000
Messages
121
Location
Temecula, CA
Tractor
4300 JD, Sync Shift
R1\'s for 4300

I have a new 4300 with R4's. My property is very steep in places and also very rocky. My dealer suggested R4's for durability but I just read on another website that the R1's can be moved much further out for stability. Should I change to R1's? If I do what will I be sacrificing?
 
/ R1's for 4300 #2  
Re: R1\'s for 4300

The only thing I can think of is the R1s are going to tear the ground a little more. If you are using it to mow with that might make a difference. I think I have read here that the R4s are more durable, maybe somebody else knows for sure. Have you put fluid in your tires? That may help stabilize it somewhat.
 
/ R1's for 4300 #3  
Re: R1\'s for 4300

Branch
I think the R-4s are a heavier duty tire than the R-1s. The ones I have seen are 6-ply rating on the R-4s and 4-ply on the R-1s. If you use a loader, backhoe, or other heavy implements you might want to stay with the R-4s. The R-4s also should be more puncture resistant than the R-1s. If you use a mid-mount mower be sure that the R-1s don't interfere with the deck if set in a wider position. I think the R-1s are larger in diameter than the R-4s so any stability gained by setting them wider would be partially offset by raising the center of gravity of the tractor./w3tcompact/icons/frown.gif I am planning to buy a 4300 with 430 loader, 48 backhoe, and mid-mount mower and I will be getting the R-4s. I don't have any steep hills on my land though. Good luck. MJB
 
/ R1's for 4300
  • Thread Starter
#4  
Re: R1\'s for 4300

I won't be doing any mowing, but have lots of loader and scraper work to do. I do have a lot of sharp rocks, brush etc.. The rear tires are filled. It sounds like the salesman was right. Thanks for the input.
 
/ R1's for 4300 #5  
Re: R1\'s for 4300

Branch I have a JD 990 4wd,my dealer talked me into the R-4s.I thought the R-1s would be better.I now have 13 hours on tractor and brush hog in terrain much like yours.My dealer suggested that I have the tires loaded.All i can say is that he was right on both counts.The R-4s are a tough tire that do a good job at many tasks.Stay SAfe BILLG
 

Marketplace Items

ALLMAND NIGHT-LIT PRO II SERIES (INOPERABLE) (A63569)
ALLMAND NIGHT-LIT...
2014 CATERPILLAR 573C FELLER BUNCHER (A62129)
2014 CATERPILLAR...
2021 CAM p4EC16W102 16ft. 7000lb Utility Trailer (A64047)
2021 CAM...
JOHN DEERE 1780 CONSERVATION VACUUM PLANTER (A63290)
JOHN DEERE 1780...
John Deere 5075E Tractor w/ John Deere 520M Loader (A64047)
John Deere 5075E...
2025 Swict 78in Bucket Skid Steer Attachment (A61572)
2025 Swict 78in...
 
Top