Quick connect identification

[Torvy]

I couldn't find anything that clearly shows how to identify what connections are installed.

I 'think' from some research that these are iso 5675 AG poppet couplers. Is the size inscribed on the side, or do I need to measure. If I measure, where? Inside?

Those who know this stuff, please educate me.

 

[ptsg]

Typically the thread size dictates the quick connect size. At least that's how it works on this size of the pond. I've never measured the body or bore, just went by thread size.

Anyway, maybe this will provide some help:

 

[MtnViewRanch]

For your current application, measure the outside of your female coupler. Most likely 1 1/2". So you have ISO 5675 poppet-type couplers.

Do yourself a favor and get a set of connect under pressure couplers for your attachment hoses.

TWO - WAY SLEEVE | Trausch Dynamics

Connect Under Pressure Design ISO 5675 Parker/Pioneer 4200 Poppet Design Two-way sleeve allows the user to hook-up with one hand and allows for breakaway if clamp or bulkhead mounted Designed for general purpose agricultural applications Max. Pres...

www.hydraulicstore.com

PLUGS | Trausch Dynamics

Connect Under Pressure Design ISO 5675 Poppet Design Designed for general purpose agricultural applications Max. Pressure: 3000 PSI Buna N Seals

www.hydraulicstore.com

Enjoy your new equipment.

 

[WranglerX]

The numbers on the connectors do actually mean something.... Go with them first.....