Quick Attach mounting plate

[abunchofidiots]

There seems to be a large variance in the dimensions of quick attach plates. Most show the width needing to be 44 to 45 inches. The vertical seems to vary wildly from 15 to 18 inches. Being an ISO standard, I'm surprised it is not described better.

 

[fruitcakesa]

I would think the distance between the top slot and the lower pin slots is the critical dimension regardless of the OA size of the plate.

 

[davedj1]

If you're talking about skid steer quick attach plates I have purchased two from different vendors on Ebay and they both fit fine. They are two different thicknesses.

 

[DK35vince]

If you're talking about skid steer quick attach plates I have purchased two from different vendors on Ebay and they both fit fine. They are two different thicknesses.

I have ordered 3 SSQA plates through Ebay, purchased a set of pallet forks, and borrowed the forks and buckets off our skid steers at work and all fit my tractor fine.
Never seen or ran into an issue with different height SSQA plates.