Loader Quick Attach for MT125

[jdeilus]

I stopped by my dealer today to let them know they have to replace my control valve for the FEL. I noticed in the Op manual for the Loader LL1101 that you have an option for a quick attach. See pic. Does anyone know if the bucket that came with the tractor will work on the quick attach or will I have to get a different bucket?

 

[LS Tractor Owner]

Yes, the bucket that came with the tractor will work with the quick attach. The problem comes in with other aftermarket attachments, such as pallet forks.... the quick attach is smaller than standard SSQA, and other attachments will have to be modified.

 

[fordtrucknut]

Your bucket will not work with the quick bucket setup. Here is the quick attach for the 1101.

 

[i7win7]

Different bucket or get a bare SSQA mounting plate and have welding shop mod your bucket
Amazon.com: Titan Attachments 5/16 Thick Heavy Duty Universal Quick Tach Skid Steer Style Mount Plate Loader Skid Bucket: Home Improvement

 

[LS Tractor Owner]

If you look at your original bucket, there are large spacers on each side of the pins. That is where the quick attach mounts. If you look at the bottom of your bucket (easily seen in your picture), you can see where the quick attach pins would lock in... YOUR BUCKET WILL FIT!

My neighbor got a new 2020 MT125 earlier this summer, he did not get the quick attach when he got the tractor. About 2 months later he got the quick attach mount (because they were not available at the time he got the tractor). His bucket fit right on....

 

[Peter 315]

^^^^^^^^^^^^It will fit But its not the standard SSQA, and other attachments will have to be modified.....

 

[Mustangjames]

This is why I built my own.

 

[LS Tractor Owner]

This is why I built my own.
View attachment 679656View attachment 679655View attachment 679654

Looks professionally done..... good job. You can drop the bucket, but can you get other attachments for it?

 

[Mustangjames]

Nope.....
So I copied the bracket setup off the bucket and made a couple of sets. So far I’ve just modified a set of Titan forks. Here they are ‘pinned on’ before the Quick attach.

 

[Mustangjames]

Nope.....
So I copied the bracket setup off the bucket and made a couple of sets. So far I致e just modified a set of Titan forks. Here they are 叢inned on before the Quick attach.

View attachment 679724View attachment 679723

 

[Mustangjames]

Here it is with the QA in use:

 

[Mustangjames]

View attachment 679729

 

[LS Tractor Owner]

Cool, so you're going to modify the attachments to fit....
your last attachments won't load....

 

[Mustangjames]

Not having much luck tonight loading up files.
I like the titan forks - they were cheap and I like the way the forks mount .... can use that back plate to design other attachments to fit such as a root grubbed... boom pole, etc.

 

[power2theq]

This is why I built my own.
View attachment 679656View attachment 679655View attachment 679654

Excellent work!

My concern is that there is a loss of lifting capacity. Did you notice anything drastic?

 

[Mustangjames]

The setup weighs about 25lbs and extends the bucket out about 6”. I’ve not noticed any loss in capacity.

 

[JTMachineDesign]

That shop floor.. you disgust me.

actually, I want to know how you did it.

 

[Mustangjames]

Rustoleum Floor Epoxy from Home Depot. It’s held up well for 8 years old.

 

[jdeilus]

I really need to learn how to weld.

 

[Skipper T]

Has anyone tried the Worksaver attachment?