Pulling the trigger on a CK2620 and a few attachments.

   / Pulling the trigger on a CK2620 and a few attachments. #1  
Joined
Jul 31, 2024
Messages
32
Tractor
MF 35
The CK2620 feels right for both size and weight. I've got a lot of catchup to do on my property to push back the years of neglect I have given the fields and surrounding house area.

Looking forward to years of working with it.

Now, on to finding the fluid film location recommendations.
 
   / Pulling the trigger on a CK2620 and a few attachments. #2  
What has "fluid Film Location" have to do with your new tractor?
 
   / Pulling the trigger on a CK2620 and a few attachments.
  • Thread Starter
#3  
What has "fluid Film Location" have to do with your new tractor?
Live in a snowy location where salt is, need to under stand what can have f on it and not as we head into fall
 
   / Pulling the trigger on a CK2620 and a few attachments. #4  
Ahhh

I live in a snowy location as well, but my tractors see no salt, as I do not run them on other than my own property.

A single spray can of Fluid film purchased from any of several local auto supply shops will treat a small tractor with material to spare. I would be less than 20 minutes application time.

Just wear old cloths.


I treat our three vehicles to a complete spray every fall. I buy Fluid Film by the case (12 cans)
 
   / Pulling the trigger on a CK2620 and a few attachments.
  • Thread Starter
#5  
Ahhh

I live in a snowy location as well, but my tractors see no salt, as I do not run them on other than my own property.

A single spray can of Fluid film purchased from any of several local auto supply shops will treat a small tractor with material to spare. I would be less than 20 minutes application time.

Just wear old cloths.


I treat our three vehicles to a complete spray every fall. I buy Fluid Film by the case (12 cans)
Do you tend to avoid hoses, seals, bearings and such? I know Fluid Film indicates that you should avoid non-oil resistant rubbers. I take that as being
weather-stripping around doors (and from experience with Krown rustproofing, I can see why). On tractors though, I am concerned about it from the start, based on that prior experience with my car and the other rustproofing.

 
   / Pulling the trigger on a CK2620 and a few attachments.
  • Thread Starter
#6  

Tractor & Equipment Auctions

2016 Ford F550 4x4 Bucket Truck with Altec AT41 - 46FT Rotating Bucket and Jib Winch (A51039)
2016 Ford F550 4x4...
2007 Ingersoll Rand P185WJD Towable Diesel Air Compressor (A49461)
2007 Ingersoll...
2014 STEPHENS 200BBL TANKER TRAILER (A50854)
2014 STEPHENS...
2010 CAT 140M MOTORGRADER (A50854)
2010 CAT 140M...
2001 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2001 Big Tex 10PI...
New/Unused 20ft Farm Iron Gate (A48837)
New/Unused 20ft...
 
Top