Pulling the trigger on a CK2620 and a few attachments.

   / Pulling the trigger on a CK2620 and a few attachments. #1  
Joined
Jul 31, 2024
Messages
32
Tractor
MF 35
The CK2620 feels right for both size and weight. I've got a lot of catchup to do on my property to push back the years of neglect I have given the fields and surrounding house area.

Looking forward to years of working with it.

Now, on to finding the fluid film location recommendations.
 
   / Pulling the trigger on a CK2620 and a few attachments. #2  
What has "fluid Film Location" have to do with your new tractor?
 
   / Pulling the trigger on a CK2620 and a few attachments.
  • Thread Starter
#3  
What has "fluid Film Location" have to do with your new tractor?
Live in a snowy location where salt is, need to under stand what can have f on it and not as we head into fall
 
   / Pulling the trigger on a CK2620 and a few attachments. #4  
Ahhh

I live in a snowy location as well, but my tractors see no salt, as I do not run them on other than my own property.

A single spray can of Fluid film purchased from any of several local auto supply shops will treat a small tractor with material to spare. I would be less than 20 minutes application time.

Just wear old cloths.


I treat our three vehicles to a complete spray every fall. I buy Fluid Film by the case (12 cans)
 
   / Pulling the trigger on a CK2620 and a few attachments.
  • Thread Starter
#5  
Ahhh

I live in a snowy location as well, but my tractors see no salt, as I do not run them on other than my own property.

A single spray can of Fluid film purchased from any of several local auto supply shops will treat a small tractor with material to spare. I would be less than 20 minutes application time.

Just wear old cloths.


I treat our three vehicles to a complete spray every fall. I buy Fluid Film by the case (12 cans)
Do you tend to avoid hoses, seals, bearings and such? I know Fluid Film indicates that you should avoid non-oil resistant rubbers. I take that as being
weather-stripping around doors (and from experience with Krown rustproofing, I can see why). On tractors though, I am concerned about it from the start, based on that prior experience with my car and the other rustproofing.

 
   / Pulling the trigger on a CK2620 and a few attachments.
  • Thread Starter
#6  

Tractor & Equipment Auctions

INGERSOLL RAND 100KW GENERATOR (A50854)
INGERSOLL RAND...
2018 Toro Grounds Master 7200 72in Zero Turn Commercial Mower (A50324)
2018 Toro Grounds...
2017-2023 Chevrolet Silverado Pickup Truck Bed (A49461)
2017-2023...
2019 Chevrolet Tahoe SUV (A49461)
2019 Chevrolet...
WE DO NOT GUARENTEE HOURS UNLESS WE SAY SO!!! (A50774)
WE DO NOT...
2018 RoGator 1100C (A51039)
2018 RoGator 1100C...
 
Top