PTO Shaft Coupler Locking Pin

   / PTO Shaft Coupler Locking Pin #1  

crashz

Veteran Member
Joined
May 11, 2005
Messages
2,475
Location
NH
Tractor
Kubota L2501, JD LT150, DR Field Mower
Stupid question, but I'm borrowing a 5ft rotary cutter from my father and the PTO shaft will connect with the tractor, but the locking pin is missing. I tried shoving a bolt in to replace the pin, but I can feel the spring is still there at the bottom of the bore. So is there a way to replace that pin?

If not, is there another way to keep it from popping off?
 
   / PTO Shaft Coupler Locking Pin #2  
Haven't had the experience yet, but I do see several sources for lock pin assemblies to repair or replace existing lock pins. Try Tractor Supply or your closest ag equipment dealer.
 
   / PTO Shaft Coupler Locking Pin #3  
Funny that you mentioned it. I had to take apart my sticking pin to clean & lubricate. If others are like mine, the holes are different diameters and you’d need the proper replacement.
 
   / PTO Shaft Coupler Locking Pin
  • Thread Starter
#4  
Yeah - this one has different size holes too. i'll cruise by TS tonight on my way home and see what they have. the two different sizes must be to support the spring.
 
 

Tractor & Equipment Auctions

2004 IH 5600l Snow Plow Truck (A52384)
2004 IH 5600l Snow...
2015 Revere Shasta 27DB 5th Wheel Travel Trailer (A51694)
2015 Revere Shasta...
4K SAND SEPARATOR (A52472)
4K SAND SEPARATOR...
2004 KENWORTH BUCKET TRUCK (A52472)
2004 KENWORTH...
2015 INTERNATIONAL 28 PASSENGER HANDICAP ACCESSIBLE SHUTTLE BUS (A52577)
2015 INTERNATIONAL...
48" Skid Steer Pallet Forks  (A52384)
48" Skid Steer...
 
Top