PTO problem with B7500

[Joe44]

I have a Kubota B7500 with a front mounted snow blower. I shifted the PTO lever forward. It was hard to shift and there was a grinding noise. When I left the clutch out, the front PTO would not turn. Now the lever shifts back and fourth without depressing the clutch and the rear PTO turns a 540 rpm all the time.

 

[wushaw]

I would say check the linkages first.

 

[devildog1]

yes you have a linkage issue, make sure all pins and bolts are engaged in you pto lever linkage, something is not allowing it to be engaged or disengaged.
DevilDog

 

[rtrent]

Did you ever resolve your problem? I'm having a rear PTO problem on B7500. Mid PTO works fine, but rear PTO doesn't spin in either 540 or 960 position. I can't see any adjustment that would change rear working if mid PTO works.